Procedure
Engine Starting Procedure – Normal Key with START/STOP Switch Type
1. Insert the key into the power switch and turn it to the ON position. 2. Push the START/STOP switch to start the engine.
Procedure
1. Insert the key into the power switch and turn it to the ON position. 2. Push the START/STOP switch to start the engine.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · OFF, ON, START conditions={"note":"Key auto-returns from START to ON upon release"}
Diagnostic · Cause: Clip not inserted in emergency stop switch Test: Check emergency stop switch for clip
Spec · OFF, ON, START conditions={"keyReturn":"Automatically returns from START to ON when released"}
Procedure · 1. Turn the IGNITION switch key to the START position and hold it there until the engine starts. WARNING: Do not turn the IGNITION switch key to the START position while the engine is running. 2. When the engine start...
Diagnostic · Cause: Possible starting system or fuel/ignition issue preventing quick start Test: Release the ignition key immediately at the 5-second mark Expected: Wait at least 10 seconds before attempting to start again