Procedure
Engine will not start – Battery connections loose or corroded
1. Clean and tighten battery connections.
Procedure
1. Clean and tighten battery connections.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 5 seconds conditions={"note":"Exceeding 5 seconds will overheat and damage the starter motor"}
Diagnostic · Cause: Battery connections loose or corroded Test: Inspect battery terminals for looseness or corrosion
Spec · Lights again after engine starts and stays lit to indicate normal oil pressure conditions={"event":"After engine start"}
Procedure · 1. Recharge battery.
Diagnostic · Cause: Battery discharged Test: Check battery charge level