Specification
Instrument Panel Indicators: Indicators Active on Ignition ON
ACG, Malfunction, Oil Pressure, Overheat conditions={"event":"Ignition switch turned ON"}
Specification
ACG, Malfunction, Oil Pressure, Overheat conditions={"event":"Ignition switch turned ON"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Follow the instructions specific to the NMEA2000-compatible display being used. 2. If the display allows selection of notification, preset it to 'Notify' (or equivalent setting). 3. Turn on the power supply to the ...
Diagnostic · Cause: Burned-out bulb or other electrical problem in that indicator circuit Test: Turn ignition switch ON and verify all indicator lights illuminate; if any fail to light, have Honda Marine dealer inspect for burned-...
Spec · Malfunction, Oil Pressure, Overheat conditions={"event":"After second buzzer beep on ignition ON"}
Procedure · 1. Turn the ignition switch to ON. The display switches ON; maintenance indication is NOT shown at this step. 2. Start the engine. Maintenance indication IS shown at this step (notify). 3. Engine running. Maintenance ...
Diagnostic · Cause: Ignition switch turned to START position while engine is already running