Procedure
1. Place the outboard in a vertical operating position. 2. Remove the vent plug and sealing washer. 3. Remove the fill/drain plug. Place the lubricant tube into the fill hole (b) and add lubricant until it appears at the vent hole (a). WARNING: Replace the sealing washers if damaged.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 900 mL (30.4 fl oz) mL conditions={"rotation":"left-hand"}
Diagnostic · Cause: Water has settled to the bottom of the gearcase Test: Visually check drained lubricant for water presence
Spec · 970 mL (32.8 fl oz) mL conditions={"rotation":"right-hand"}
Procedure · 1. Drain and refill the gearcase lubricant (refer to Gearcase Lubrication section).
Diagnostic · Cause: Water mixed with the lubricant Test: Visually inspect drained lubricant color