Procedure
1. Move the control handle into the neutral position. 2. Press the throttle only button while moving the control handle ahead to the forward detent. 3. Confirm engagement: the horn will sound to indicate throttle only is engaged. 4. Advance throttle to increase engine RPM as needed for warm-up. WARNING: Engine RPM is limited automatically to prevent engine damage.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · First detent rearward from neutral conditions={"direction":"Pull handle back"}
Diagnostic · Cause: ERC not placed in throttle only mode during unmanned helm operation Test: Verify ERC is in throttle only mode; gear position should remain in neutral while RPM can still be increased
Spec · First detent forward from neutral conditions={"direction":"Push handle forward"}
Procedure · 1. Ensure ERC levers are in neutral (prerequisite before pressing button). 2. Press the THROTTLE ONLY button. The button light will turn on and the neutral lights will blink. 3. Place either ERC lever into gear. The w...
Diagnostic · Cause: Failure causing forced neutral/idle on port outer engine; inner port engine also forced to neutral/idle Test: Move port control handle back to neutral then into gear to restore inner engine operation