Engine Oil Check / Fill Procedure (Final Steps)

Related KB links

• Engine Oil: Engine Oil Fill Volume (to midpoint of operating range)

  Spec · 6 liter conditions={"target":"midpoint of cross hatched region"}

• Low engine oil level (non-critical beep)

  Diagnostic · Cause: Engine oil level below acceptable threshold Test: Check engine oil level per Fuel and Oil – Checking and Adding Engine Oil procedure

• Engine Oil: Engine Oil Fill Volume (to midpoint of operating range)

  Spec · 6.3 US qt conditions={"target":"midpoint of cross hatched region"}

• Checking and Adding Engine Oil

  Procedure · 1. Before starting (cold engine), tilt outboard out/up past vertical to allow trapped oil to drain back to the oil sump. Allow outboard to remain tilted for approximately one minute. WARNING: Do not overfill. 2. Tilt ...

• Engine Runs Erratically

  Diagnostic · Cause: Low oil pressure Test: Check oil level