Procedure
3. Place a rag or towel around the valve, release pressure by pushing core of valve end in. WARNING: Ensure pressure is fully released before proceeding to avoid fuel or fluid spray. 4. Unscrew the filter in a counterclockwise direction to remove.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 6.0 liter (6.3 US qt) liter conditions={"includes":"oil filter replacement"}
Diagnostic · Cause: Debris accumulation in water separating fuel filter Test: Inspect filter for blockage; replace filter if plugged
Spec · 10 seconds conditions={"description":"Time allowed to complete the second TRANSFER button press before the request is automatically cancelled"}
Procedure · 1. Turn ignition key switch to the OFF position. 2. Remove the fuel vapor purge relief valve cap located at the rear of the engine to release fuel system pressure. WARNING: Failure to release pressure from the fuel sy...
Diagnostic · Cause: Water in the fuel filter has reached the full level Test: Visually inspect fuel filter holder for water accumulation