Procedure
1. Close the manual vent screw before transportation. 2. Open the manual vent screw before operation or before removing the cap. 3. Turn the fuel tank cap to the right until an audible click is heard, confirming the cap is fully seated. The built-in device prevents overtightening.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 34.4 kPa conditions={"psi_equivalent":"5.0 psi","description":"Valve opens to vent to atmosphere when internal tank pressure exceeds this value"}
Diagnostic · Cause: Fuel tank vent not open or restricted
Spec · 34.4 kPa (5.0 psi) conditions={"applicability":"Produced after January 1, 2011, for use with outboard engines"}
Procedure · 1. When installing the fuel tank cap, turn the cap to the right until you hear a click. This signals that the fuel cap is fully seated. A built-in device prevents overtightening. 2. Open the manual vent screw on top o...
Diagnostic · Cause: Stuck anti-siphon valve located on permanently built-in type fuel tanks