Procedure

Oil Filling

1. Remove the oil fill cap and add recommended oil to the midpoint of the operating range (midpoint of cross hatched region). Adding approximately 6 liter (6.3 US qt) will bring oil level to midpoint of cross hatched region. 2. Install oil fill cap. 3. With outboard in water or cooling water flush hose connected, idle engine for five minutes to check for leaks at the oil filter. WARNING: Ensure outboard is in water or cooling water flush hose is connected before idling engine. 4. Stop engine and check oil level. Refer to Fuel and Oil – Checking and Adding Engine Oil.