Specification
Engine: Stroke
82 mm (3.23 in.) mm
Specification
82 mm (3.23 in.) mm
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Place the fuel tank in the boat so the vent is higher than the fuel level under normal boat operating conditions.
Spec · 82 mm (3.23 in.) mm
Procedure · 1. Before starting (cold engine), tilt outboard out/up past vertical to allow trapped oil to drain back to the oil sump. Allow outboard to remain tilted for approximately one minute. WARNING: Do not overfill. 2. Tilt ...
Spec · 1731 cc (105.6 cid) cc
Spec · SAE 25W-40