Specification
Manual Tilt Release Valve: Manual Tilt Release Valve - Turn Out Amount
3 turns counterclockwise
Specification
3 turns counterclockwise
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Turn out the manual tilt release valve three turns counterclockwise to allow manual tilting. WARNING: The manual tilt release valve must be tightened before operating the outboard to prevent the outboard from tilti...
Diagnostic · Cause: Excessive trim-in (trim under) causing the bow to plow into the water; unexpected turn can occur when any turn is attempted or a significant wave is encountered Test: Check trim angle; install stainless steel t...
Spec · First 20° conditions={"operation":"On plane while boat is operating"}
Procedure · 1. Install the fuel demand valve (FDV) in the fuel hose between the pressurized fuel tank and the engine. 2. Verify the FDV is oriented correctly; the manual release (push-in button) should be accessible for emergency...
Diagnostic · Cause: Excessive trim-out (trim up) condition Test: Reduce trim angle and observe whether porpoising and ventilation cease