Overheating of engine

Related KB links

• Test tank: Minimum water level above anti-ventilation plate (test tank)

  Spec · 10 cm (4 in.) conditions={"purpose":"Prevent engine overheating during test tank operation"}

• Periodic Maintenance Schedule

  Procedure · 1. Fuel System – Fuel filter: Check and clean or replace if necessary. WARNING: Intervals: First 20 hrs/1 month, Every 50 hrs/3 months, Every 100 hrs/6 months, Every 200 hrs/1 year. 2. Fuel System – Carburetor: Strip,...

• Test Tank Setup: Minimum water level above anti-ventilation plate for test tank operation

  Spec · 10 cm (4 in.) conditions={"context":"To avoid overheating of the engine"}

• Daily Inspection – Cooling Water

  Procedure · 1. After starting the outboard motor, confirm that water is being discharged from the cooling water check port. Repair if no discharge is observed. WARNING: Running the engine without cooling water flow can cause seve...

• Engine failing to start

  Diagnostic · Cause: Ignition timing incorrect