Procedure
Cold Engine Start
1. Raise the Free accel lever a little. 2. Turn the main switch key to the start position. 3. Stop pushing the key when the engine has started. 4. Return the choke plate to the open position.
Procedure
1. Raise the Free accel lever a little. 2. Turn the main switch key to the start position. 3. Stop pushing the key when the engine has started. 4. Return the choke plate to the open position.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · ~400 rpm conditions={"state":"cold start","duration":"several minutes"}
Diagnostic · Cause: Incorrect adjustment of throttle link
Spec · 0 °C (32°F) conditions={"situation":"Mooring in cold weather","risk":"Water residue in pump may freeze and damage pump and impeller"}
Procedure · 1. Install the stop switch lock to the stop switch, and attach the stop switch lanyard securely to the operator or to the operator's PFD (Personal Flotation Device). WARNING: Always secure the lanyard to the operator ...
Diagnostic · Cause: Possible battery drain or engine flood; starter overuse Test: Return main switch to ON, wait 10 seconds or more, then attempt to crank again