Procedure
1. Loosen the tank cap until it contacts the tab lock and release internal pressure completely. 2. Press down the tab lock and open the tank cap. 3. Fill the fuel carefully not to overflow. 4. After filling the tank, close the fuel tank cap until two clicks are heard.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 12 L (3.17 US gal)
Diagnostic · Cause: Internal pressure of fuel tank raised by heat from sources such as sunlight; cap loosened using incorrect procedure. Test: Inspect fuel tank cap opening procedure; ensure correct procedure is followed.
Spec · 12 L (US gal: 3.17) conditions={"type":"Separate"}
Procedure · 1. Fully open the air vent screw on the fuel tank cap and release internal pressure. WARNING: Ensure internal pressure is fully released before opening cap. 2. Open the fuel tank cap slowly. 3. Fill the fuel carefully...
Diagnostic · Cause: Fuel tank overfilled; air vent screw loose or open under high temperature conditions Test: Check fill level does not exceed tank capacity; ensure air vent screw is closed during transport/storage