Procedure
Manual Choke Operation When Choke Solenoid Fails (EP and EPT Type Only)
1. Remove the top cowl. 2. Close the choke plate by finger.
Procedure
1. Remove the top cowl. 2. Close the choke plate by finger.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2 N·m conditions={"also":"1.5 ft·lb, 0.2 kgf·m"}
Diagnostic · Cause: Manual relief valve is open/not fully closed Test: Inspect and confirm the manual relief valve is fully closed before engine operation
Spec · Choke Knob
Procedure · 1. Remove the top cowl. 2. Close the choke plate by finger. 3. Raise the free throttle lever a little. 4. Turn the main switch key to start position. 5. Stop pushing the key when the engine has started. 6. Return the ...
Diagnostic · Cause: Outboard motor tilted too high, causing air to be sucked through the water inlet Test: Check that the cooling water intake (water inlet) remains fully submerged during shallow water drive