Procedure
1. Move to a safe place quickly. WARNING: Do not continue to run the engine even though speed is limited to 2800 min⁻¹ (rpm). 2. Stop the engine and allow it to cool down. 3. Check engine oil level and add engine oil if necessary. 4. If oil level is too low or too high, consult your dealer.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2800 min⁻¹ (rpm) conditions={"activation":"Low oil pressure detected"}
Diagnostic · Cause: Low oil pressure causes oil pressure switch to turn ON, activating Low Speed ESG which suppresses ignition Test: Check engine oil level; add oil if necessary Expected: Oil pressure switch OFF under normal condi...
Spec · 2800 rpm conditions={"trigger":"Cooling water fault, oil pressure fault, or sensor fault"}
Procedure · 1. Move to a safe place quickly and stop the engine. WARNING: Do not continue to run the engine with ESG active. 2. Check the engine oil level. 3. Add engine oil if the level is low. 4. Consult your dealer if the engi...
Diagnostic · Cause: Low oil pressure (oil pressure switch ON) Test: Continuous buzzer sound; LED lamp ON; Low Speed ESG activated — ignition suppressed and fueling disabled; engine speed controlled under 2800 rpm