Procedure
Response to Warning Indicator System Self-Test at Startup
1. Observe warning lamp (LED) illuminating for several seconds at engine start — this is a normal system test and requires no action.
Procedure
1. Observe warning lamp (LED) illuminating for several seconds at engine start — this is a normal system test and requires no action.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 5 seconds conditions={"warning":"Exceeding 5 seconds may drain battery and prevent starting or damage starter"}
Diagnostic · Cause: Routine system self-test Test: LED lamp illuminates for several seconds on startup
Spec · 5 seconds conditions={"warning":"Exceeding 5 seconds may deplete battery and/or damage starter"}
Procedure · 1. After starting the outboard motor, confirm that water is being discharged from the cooling water check port. Repair if no discharge is observed. WARNING: Running the engine without cooling water flow can cause seve...
Diagnostic · Cause: Fault condition active; warning system engaged Test: Identify fault via warning horn pattern and lamp; engine will not stop but speed is restricted