Specification
Engine: Bore × Stroke
55 × 44 mm (2.17 × 1.73 in)
Specification
55 × 44 mm (2.17 × 1.73 in)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Before operating, confirm the spare stop switch lock is present in the tool bag. 2. If the operator falls into the water, use the spare emergency stop switch lock to restart/re-engage the engine stop switch system.
Diagnostic · Cause: Use of improper engine oil
Spec · 55 mm (2.17 in)
Procedure · 1. Leave the outboard motor for 5 minutes and check oil level on the dipstick. Add oil if necessary. 2. Insert the dipstick completely into the hole and install the top cowl. 3. Start the engine and idle for 5 minutes...
Diagnostic · Cause: Blown 20 Amp fuse in the starting circuit