Specification
Engine Oil: Oil replenishment target level
Middle dipstick mark conditions={"starting_level":"low or at minimum mark"}
Specification
Middle dipstick mark conditions={"starting_level":"low or at minimum mark"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. If the oil level is low or at the lowest mark, add recommended oil to the middle dipstick mark. WARNING: Do not add engine oil of a brand and grade other than the existing one. If oil of another brand or grade is a...
Diagnostic · Cause: Excess oil added during replenishment Test: Check dipstick level against upper limit mark
Spec · 600 mL conditions={"position":"lower level mark"}
Procedure · 1. If the oil level is low or at the lowest mark, add recommended oil to the middle dipstick mark. WARNING: Do not add engine oil of a brand or grade other than the existing one. If oil of another brand or grade is ad...
Diagnostic · Cause: Insufficient or excessive oil fill Test: Dipstick level check after 5-minute engine cool-down