Specification
Engine Valve: Valve Clearance – Intake (IN)
0.13–0.17 mm conditions={"altUnit":"0.0051–0.0067 in","type":"Intake"}
Specification
0.13–0.17 mm conditions={"altUnit":"0.0051–0.0067 in","type":"Intake"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Fuel System – Fuel filter: Check and clean or replace if necessary. WARNING: Intervals: First 20 hrs/1 month, Every 50 hrs/3 months, Every 100 hrs/6 months, Every 200 hrs/1 year. 2. Fuel System – Carburetor: Strip,...
Diagnostic · Cause: Incorrect valve clearance
Spec · 0.13–0.17 mm conditions={"alternative_unit":"0.0051–0.0067 in"}
Procedure · 1. With the shift lever in Neutral or Forward, tilt the motor up slowly by about 40° and then lower the tilt lever to set at the shallow water running position. WARNING: Do not place your hand between the swivel brack...
Diagnostic · Cause: Incorrect valve clearance