Specification
Outboard motor tilt: Shallow water tilt angle
~40 degrees conditions={"type":"Manual tilt (MF, EF type)","shift_lever":"Neutral or Forward"}
Specification
~40 degrees conditions={"type":"Manual tilt (MF, EF type)","shift_lever":"Neutral or Forward"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Operate the Power Tilt switch and tilt the outboard motor up into the desired shallow water running position.
Diagnostic · Cause: Outboard motor tilted too high, causing air to be sucked through the water inlet Test: Check that the cooling water intake (water inlet) remains fully submerged during shallow water drive
Spec · 61 degree conditions={"transom_angle":"-12°"}
Procedure · 1. With the shift lever in Neutral or Forward, tilt the motor up slowly by about 40°, then lower the tilt lever to set it at the shallow water running position. 2. To return to normal running position: tilt the motor ...
Diagnostic · Cause: Trim angle set too low Test: Observe hull attitude relative to water surface while underway Expected: Hull horizontal; anti-ventilation plate parallel to water surface