Specification
Power Tilt reservoir tank: Power Tilt Oil Level Check Position
Oil level must reach the bottom line of the plug hole conditions={"motorPosition":"Tilted up and locked with tilt stopper","tankPosition":"Vertical"}
Specification
Oil level must reach the bottom line of the plug hole conditions={"motorPosition":"Tilted up and locked with tilt stopper","tankPosition":"Vertical"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Tilt the outboard motor up and lock the tilt with the tilt stopper. WARNING: Ensure the outboard motor is secured to transom or service stand before tilting. Do not go under a tilted-up and locked outboard motor. D...
Diagnostic · Cause: Dead battery or failed power tilt switch. Test: Attempt to operate the power tilt switch; if no response, check battery charge and switch continuity.
Spec · ATF Dexron III conditions={"note":"Automatic transmission fluid or equivalent acceptable"}
Procedure · 1. Secure the outboard motor to the transom or service stand. WARNING: Be sure the outboard motor is secured to transom or service stand; accidental drop or fall could lead to severe personal injury. 2. Tilt the outbo...
Diagnostic · Cause: Incorrect adjustment of throttle link