Diagnostic
30 A Main Fuse - Engine will not start or run (30 A Main Fuse)
Cause: Blown 30 A main fuse protecting ignition switch and related circuits
Diagnostic
Cause: Blown 30 A main fuse protecting ignition switch and related circuits
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 7.5 A, 10 A, 15 A, 30 A conditions={"location":"Junction Box"}
Procedure · 1. Replace fuse(s). See p. 120.
Spec · 3,000 rpm conditions={"note":"Running below 3,000 rpm for more than 30% of operating time leads to water condensation and unburned fuel mixing with engine oil"}
Procedure · 1. Turn the ignition switch to ON. The display switches ON; maintenance indication is NOT shown at this step. 2. Start the engine. Maintenance indication IS shown at this step (notify). 3. Engine running. Maintenance ...
Diagnostic · Cause: Blown 7.5 A, 10 A, 15 A, or 30 A main fuse protecting electric starter relay and related circuits