Specification
3,000 rpm conditions={"note":"Running below 3,000 rpm for more than 30% of operating time leads to water condensation and unburned fuel mixing with engine oil"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Run the engine at trolling speed for the first 15 minutes. Use the minimum throttle opening necessary to operate the boat at a safe trolling speed. WARNING: Avoid continuous operation at a steady speed throughout t...
Diagnostic · Cause: Unburned fuel mixing with the oil, caused by running the engine below 3,000 rpm for more than 30% of the time or frequent starting and stopping without allowing the engine to warm up Test: Check oil level on di...
Spec · 2000 rpm conditions={"ambient_temp":"Below 41°F (5°C)"}
Procedure · 1. Check the engine oil level with the engine stopped and the outboard motor in the vertical position. 2. Unlock and remove the engine cover (refer to p. 88). 3. Remove the dipstick and wipe it clean. 4. Insert the di...
Diagnostic · Cause: Water condensation in the engine mixing with oil, caused by running the engine below 3,000 rpm for more than 30% of the time or frequent starting and stopping without allowing the engine to warm up Test: Inspec...