Buzzer and overheat indicator activate and engine speed is automatically reduced

Related KB links

• Engine overheat protection system: Engine speed limit on overheat alert

  Spec · 1800 rpm conditions={"trigger":"Overheat indicator activated"}

• Engine Warm-Up Procedure

  Procedure · 1. During the warm-up period, check the oil pressure indicator (p. 49), overheat indicator (p. 49), and cooling system indicator (p. 50). WARNING: If the indicators show any abnormal condition, immediately stop the en...

• Engine Protection System: Engine stop delay after overheat protection activation

  Spec · 20 seconds conditions={"trigger":"Overheat indicator activates and engine speed limited"}

• Engine Warm-Up Before Getting Underway

  Procedure · 1. Above 41°F (5°C): Allow the engine to warm up for 2 to 3 minutes before getting underway. 2. Below 41°F (5°C): Raise the fast idle lever to achieve approximately 2,000 rpm and warm up the engine for at least 10 min...

• Buzzer activates and overheat indicator illuminates during operation

  Diagnostic · Cause: Engine not sufficiently warmed up before raising engine speed Test: Check whether proper warm-up procedure was followed before increasing RPM