Specification
Engine Protection System: Engine stop delay after overheat protection activation
20 seconds conditions={"trigger":"Overheat indicator activates and engine speed limited"}
Specification
20 seconds conditions={"trigger":"Overheat indicator activates and engine speed limited"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Idle the engine in neutral and check the cooling system indicator for water flow. 2. If water is flowing from the cooling system indicator, continue idling for 30 seconds. 3. Confirm the overheat indicator turns of...
Diagnostic · Cause: Engine overheating — engine protection system engaged Test: Observe overheat indicator (RED) and buzzer activation; engine speed decrease at cruising speed is automatic
Spec · 20 seconds conditions={"trigger":"Overheat condition persists after initial speed reduction"}
Procedure · 1. During the warm-up period, check the oil pressure indicator (p. 49), overheat indicator (p. 49), and cooling system indicator (p. 50). WARNING: If the indicators show any abnormal condition, immediately stop the en...
Diagnostic · Cause: Overheat protection system triggered due to insufficient warm-up Test: Allow engine to warm up fully before increasing speed; monitor overheat indicator