Specification
Engine overheat protection system: Engine shutdown delay after sustained overheat
20 seconds conditions={"trigger":"Overheat condition persists after initial speed reduction"}
Specification
20 seconds conditions={"trigger":"Overheat condition persists after initial speed reduction"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Idle the engine in neutral and check the cooling system indicator for water flow. 2. If water is flowing from the cooling system indicator, continue idling for 30 seconds. 3. Confirm the overheat indicator turns of...
Diagnostic · Cause: Sustained engine overheating condition Test: Refer to TAKING CARE OF UNEXPECTED PROBLEMS (p. 115)
Spec · 20 seconds conditions={"trigger":"Overheat indicator activates and engine speed limited"}
Procedure · 1. During the warm-up period, check the oil pressure indicator (p. 49), overheat indicator (p. 49), and cooling system indicator (p. 50). WARNING: If the indicators show any abnormal condition, immediately stop the en...
Diagnostic · Cause: Engine overheating — engine protection system engaged Test: Observe overheat indicator (RED) and buzzer activation; engine speed decrease at cruising speed is automatic