Procedure
Correct hard starting or stalls after starting due to bad fuel
1. Drain fuel tank and vapor separator (see p. 110–111). 2. Refill with fresh gasoline (see p. 99).
Procedure
1. Drain fuel tank and vapor separator (see p. 110–111). 2. Refill with fresh gasoline (see p. 99).
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Lights again after engine starts and stays lit to indicate normal oil pressure conditions={"event":"After engine start"}
Diagnostic · Cause: Bad fuel; outboard motor stored without treating or draining gasoline, or refueled with bad fuel Test: Inspect fuel for degradation or contamination
Spec · 2 inches (5 cm) conditions={"context":"Required during engine start and extended run after submersion"}
Procedure · 1. Replace fuel filters (see p. 100).
Diagnostic · Cause: Fuel filter or fuel tank clogged Test: Inspect fuel filter and fuel tank for blockage