Procedure
Correct hard starting or stalls after starting due to fuel hose not primed
1. Squeeze priming bulb (see p. 55).
Procedure
1. Squeeze priming bulb (see p. 55).
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 10 A conditions={"type":"DBW type"}
Diagnostic · Cause: Fuel hose not primed Test: Check if priming bulb has been squeezed
Spec · 10 seconds conditions={"trigger":"After failed start attempt within 5 seconds"}
Procedure · 1. Replace fuel filters (see p. 100).
Diagnostic · Cause: Fuel filter or fuel tank clogged Test: Inspect fuel filter and fuel tank for blockage