Diagnostic
Hard starting or stalls after starting
Cause: Fuel hose not primed Test: Check if priming bulb has been squeezed
Diagnostic
Cause: Fuel hose not primed Test: Check if priming bulb has been squeezed
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 80 hours after reset
Procedure · 1. Squeeze priming bulb (see p. 55).
Spec · Lights again after engine starts and stays lit to indicate normal oil pressure conditions={"event":"After engine start"}
Procedure · 1. Replace fuel filters (see p. 100).
Diagnostic · Cause: Fuel filter or fuel tank clogged Test: Inspect fuel filter and fuel tank for blockage