Maintenance indication system: First notification timing after reset

Related KB links

• NMEA 2000-Compatible Display Setup for Maintenance Notification

  Procedure · 1. Follow the instructions specific to the NMEA2000-compatible display being used. 2. If the display allows selection of notification, preset it to 'Notify' (or equivalent setting). 3. Turn on the power supply to the ...

• 'Periodic Maintenance' indication remains in display after service

  Diagnostic · Cause: Hour counter was not reset after periodic maintenance was performed Test: Check whether hour counter was reset; reset if not done

• Maintenance indication system: Second notification timing after reset

  Spec · 100 hours after reset

• Maintenance Schedule – Regular Service Periods

  Procedure · 1. Check engine oil level before each use. 2. Change engine oil at first month or 20 hours, then every 6 months or 100 hours. 3. Replace engine oil filter every 6 months or 100 hours (dealer recommended). 4. Change ge...

• Oil pressure indicator does not come on within 30 seconds after restart and engine protection system remains activated

  Diagnostic · Cause: Lubrication system fault Test: Return to nearest boat landing and have outboard motor inspected by authorized Honda Marine dealer