Diagnostic
Cause: Lubrication system fault Test: Return to nearest boat landing and have outboard motor inspected by authorized Honda Marine dealer
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 30 seconds conditions={"trigger":"Engine restarted after low oil pressure event with oil at recommended level"}
Procedure · 1. Idle the engine in neutral and check the cooling system indicator for water flow. 2. If water is flowing from the cooling system indicator, continue idling for 30 seconds. 3. Confirm the overheat indicator turns of...
Spec · Lights again after engine starts and stays lit to indicate normal oil pressure conditions={"event":"After engine start"}
Procedure · 1. During the warm-up period, check the oil pressure indicator (p. 49), overheat indicator (p. 49), and cooling system indicator (p. 50). 2. If any indicator shows an abnormal condition, immediately stop the engine an...
Diagnostic · Cause: Low engine oil level or lubrication system fault Test: Stop engine, check engine oil level (p.89), add oil if needed, restart engine and verify oil pressure indicator comes on within 30 seconds