Procedure
1. During the warm-up period, check the oil pressure indicator (p. 49), overheat indicator (p. 49), and cooling system indicator (p. 50). 2. If any indicator shows an abnormal condition, immediately stop the engine and determine the cause of the problem. Refer to TAKING CARE OF UNEXPECTED PROBLEMS on p. 115. 3. If the fast idle control was used to warm up the engine, gradually return the control lever to the N (neutral) position as the engine warms up.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2000 rpm conditions={"ambientTemp":"Below 41°F (5°C)","method":"Push fast idle button, then move control lever forward or reverse"}
Diagnostic · Cause: Possible low oil pressure or oil system fault Test: Check oil pressure indicator on p. 49; stop engine immediately and refer to p. 115
Spec · approximately 2,000 rpm conditions={"ambientTemp":"below 41°F (5°C)"}
Procedure · 1. During the warm-up period, check the oil pressure indicator (p. 49), overheat indicator (p. 49), and cooling system indicator (p. 50). WARNING: If the indicators show any abnormal condition, immediately stop the en...
Diagnostic · Cause: Possible engine overheating Test: Check overheat indicator on p. 49; stop engine immediately and refer to p. 115