Specification
Engine: Warm-up target RPM (cold weather)
2000 rpm conditions={"ambientTemp":"Below 41°F (5°C)","method":"Push fast idle button, then move control lever forward or reverse"}
Specification
2000 rpm conditions={"ambientTemp":"Below 41°F (5°C)","method":"Push fast idle button, then move control lever forward or reverse"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. If ambient temperature is above 41°F (5°C), warm up the engine for 2 to 3 minutes before getting underway. 2. If ambient temperature is below 41°F (5°C), raise the fast idle lever to achieve approximately 2,000 rpm...
Diagnostic · Cause: Engine not sufficiently warmed up before engine speed was raised Test: Check warm-up duration and fast idle lever usage prior to increasing RPM
Spec · 2000 rpm conditions={"ambient_temp":"Below 41°F (5°C)"}
Procedure · 1. Turn the ignition switch key to the START position to crank the engine. WARNING: Do not operate the starter for more than 5 seconds at a time — this will overheat and damage the starter motor. Do NOT turn the key t...
Diagnostic · Cause: Engine not properly warmed up; overheat protection triggered Test: Allow engine to complete proper warm-up cycle and retry