Maintenance indication system: Second notification timing after reset

Related KB links

• NMEA 2000-Compatible Display Setup for Maintenance Notification

  Procedure · 1. Follow the instructions specific to the NMEA2000-compatible display being used. 2. If the display allows selection of notification, preset it to 'Notify' (or equivalent setting). 3. Turn on the power supply to the ...

• 'Periodic Maintenance' indication remains in display after service

  Diagnostic · Cause: Hour counter was not reset after periodic maintenance was performed Test: Check whether hour counter was reset; reset if not done

• Maintenance indication system: First notification timing after reset

  Spec · 80 hours after reset

• Operating Hour Notification – Display Steps

  Procedure · 1. Turn the ignition switch to ON. The display switches ON; maintenance indication is NOT shown at this step. 2. Start the engine. Maintenance indication IS shown at this step (notify). 3. Engine running. Maintenance ...

• Oil pressure indicator does not come on within 30 seconds after restart and engine protection system remains activated

  Diagnostic · Cause: Lubrication system fault Test: Return to nearest boat landing and have outboard motor inspected by authorized Honda Marine dealer