Procedure
Engine will not start – Spark plugs faulty, fouled, or improperly gapped
1. Gap or replace spark plugs. See p. 95.
Procedure
1. Gap or replace spark plugs. See p. 95.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 5 seconds conditions={"note":"Exceeding 5 seconds will overheat and damage the starter motor"}
Diagnostic · Cause: Spark plugs faulty, fouled, or improperly gapped Test: Inspect and measure spark plug gap
Spec · 0.039 – 0.043 in (1.0 – 1.1 mm) conditions={"engine":"BF200D"}
Procedure · 1. Dry and reinstall spark plugs. 2. Start engine with the throttle open.
Diagnostic · Cause: Spark plugs wet with fuel (flooded engine) Test: Remove and inspect spark plugs for fuel saturation