Procedure
Engine will not start – Flooded engine (spark plugs wet with fuel)
1. Dry and reinstall spark plugs. 2. Start engine with the throttle open.
Procedure
1. Dry and reinstall spark plugs. 2. Start engine with the throttle open.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · N (Neutral) conditions={"requirement":"Required for engine start"}
Diagnostic · Cause: Spark plugs wet with fuel (flooded engine) Test: Remove and inspect spark plugs for fuel saturation
Spec · 5 seconds conditions={"note":"Exceeding 5 seconds will overheat and damage the starter motor"}
Procedure · 1. Gap or replace spark plugs. See p. 95.
Diagnostic · Cause: Wet/flooded spark plugs Test: Remove spark plugs and inspect for moisture Expected: Dry spark plugs after removal and drying