Specification
Gearshift/Throttle Control Lever: gearshift_position_for_start
N (Neutral) conditions={"requirement":"Required for engine start"}
Specification
N (Neutral) conditions={"requirement":"Required for engine start"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Ensure the gearshift/throttle control lever is in the NEUTRAL position. 2. Press and hold the [-] switch. 3. While holding the [-] switch, turn the gearshift/throttle control lever forward past the shift point. WAR...
Diagnostic · Cause: Control lever is in F (forward) or R (reverse) gear instead of N (neutral) Test: Confirm control lever is set to the N (neutral) position before attempting to start
Spec · 35 degrees conditions={"direction":"either forward or reverse"}
Procedure · 1. Ensure the gearshift/throttle control lever is in the N (neutral) position (refer to p. 56). WARNING: Engine will not start if lever is not in neutral. 2. Confirm the emergency stop switch clip is inserted into the...
Diagnostic · Cause: Control lever is not in the N (neutral) position; F (forward) or R (reverse) gear is engaged Test: Confirm the control lever is set to the N (neutral) position before attempting to start