Procedure
1. Stop the engine. 2. Disconnect the battery cable at the battery negative (–) terminal. WARNING: Failure to disconnect the battery negative terminal before replacing the fuse may cause a short circuit. 3. Remove the engine cover (refer to p. 88). 4. Open the junction box cover. Tools: Fuse Puller Parts: Spare Fuse 7.5 A, Spare Fuse 10 A, Spare Fuse 15 A, Spare Fuse 30 A
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 7.5 A, 10 A, 15 A, 30 A
Diagnostic · Cause: Blown 7.5 A, 10 A, 15 A, or 30 A main fuse protecting electric starter relay and related circuits
Spec · 7.5 A, 10 A, 15 A, 30 A conditions={"location":"Junction Box"}
Procedure · 1. Stop the engine. 2. Disconnect the battery. WARNING: Always disconnect the battery before working on the electrical system. 3. Remove the engine cover (see p. 88). 4. Open the junction box cover. 5. Remove the old ...
Diagnostic · Cause: Blown 30 A main fuse protecting ignition switch and related circuits