Procedure
1. Locate the junction box where the spare fuse is stored. 2. Push the two pawls on the junction box to release the spare fuse compartment. 3. Pull out the spare fuse. 4. Install the spare fuse in place of the blown fuse.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 30 A conditions={"type":"DBW type"}
Diagnostic · Cause: Uncorrected underlying electrical problem in the system Test: Inspect electrical system for shorts or overloads; take outboard motor to an authorized Honda Marine dealer for inspection and service, or refer to ...
Spec · 30 A conditions={"type":"Mechanical wire type"}
Procedure · 1. Pull the old fuse out of the clip using the fuse puller supplied in the junction box. 2. Push a new fuse of the correct rating into the clips. Main fuse ratings available: 7.5 A, 10 A, 15 A, 30 A. Tools: Fuse pulle...
Diagnostic · Cause: Blown 30 A main fuse protecting ignition switch and related circuits