Procedure

Spark Plug Service – Standard Spark Plug Removal

1. Disconnect the battery negative (–) terminal. WARNING: Always disconnect the negative battery terminal first to prevent electrical hazards. 2. Unlock and remove the engine cover (refer to p. 88). 3. Disconnect the wire connector from the ignition coil by pushing on the lock tab and pulling on the connector. Pull on the plastic connector, not the wires. 4. Remove the ignition coil mounting bolt using a 10 mm wrench, then remove the ignition coil by pulling it up slightly. WARNING: Do not strike or drop the ignition coil, or it may be damaged and require replacement. Tools: 10 mm wrench Parts: Spark Plug ZFR6K-11E (NGK)