Specification
Engine: Idle speed
650 ± 50 rpm conditions={"engine":"BF250D"}
Specification
650 ± 50 rpm conditions={"engine":"BF250D"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Above 41°F (5°C): Allow the engine to warm up for 2 to 3 minutes before getting underway. 2. Below 41°F (5°C): Raise the fast idle lever to achieve approximately 2,000 rpm and warm up the engine for at least 10 min...
Diagnostic · Cause: Fast idle lever raised (side-mount type) Test: Check fast idle lever position
Spec · 650 ± 50 rpm conditions={"engine":"BF225D"}
Procedure · 1. If ambient temperature is above 41°F (5°C), warm up the engine for 2 to 3 minutes before getting underway. 2. If ambient temperature is below 41°F (5°C), raise the fast idle lever to achieve approximately 2,000 rpm...
Diagnostic · Cause: Engine not sufficiently warmed up before engine speed was raised Test: Check warm-up duration and fast idle lever usage prior to increasing RPM