Specification
Fuel System: Maximum Methanol Content
5 % conditions={"requirement":"must contain cosolvents and corrosion inhibitors"}
Specification
5 % conditions={"requirement":"must contain cosolvents and corrosion inhibitors"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Drain the fuel into an approved fuel container. WARNING: Use only an approved fuel container when draining fuel. 2. Unhook the drain hose from the clip on the lower left of the head cover. 3. Set the end of the hos...
Diagnostic · Cause: Use of fuel with ethanol content greater than 10% or methanol content greater than 5% Test: Verify fuel ethanol content ≤10% and methanol content ≤5%
Spec · 10 % conditions={"fuel_type":"unleaded gasoline (E10)"}
Procedure · 1. Drain the vapor separator before adding fuel stabilizer. WARNING: Do not leave the vapor separator undrained prior to adding stabilizer, as residual deteriorated fuel can cause system damage. 2. Fill the fuel tank ...
Diagnostic · Cause: Potential emission control system issue