Specification
Gearshift/Throttle Control Lever: Gear engagement angle from neutral
32 degrees conditions={"description":"Angle of control lever movement from N (neutral) required to select a gear"}
Specification
32 degrees conditions={"description":"Angle of control lever movement from N (neutral) required to select a gear"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Set the remote control lever in the NEUTRAL position (refer to p. 25-26). 2. Stop the engine (refer to p. 68). 3. Remove the engine cover (refer to p. 88). 4. Shift gear into NEUTRAL by inserting the Phillips screw...
Diagnostic · Cause: Control lever is in F (forward) or R (reverse) gear instead of N (neutral) Test: Confirm control lever is set to the N (neutral) position before attempting to start
Spec · 35 degrees conditions={"description":"Angle of control lever movement from N (neutral) required to select a gear (F or R)"}
Procedure · 1. Put the emergency stop switch clip into the emergency stop switch, and attach the emergency stop switch lanyard securely to the operator or to the operator's PFD (Personal Flotation Device). WARNING: The engine wil...
Diagnostic · Cause: Control lever is not in the N (neutral) position; F (forward) or R (reverse) gear is engaged Test: Confirm the control lever is set to the N (neutral) position before attempting to start