Procedure
1. Open the manual vent screw on top of the fuel cap. 2. Turn the fuel cap until it contacts the tab lock. 3. Press down on the tab lock. Rotate the fuel cap 1/4 turn to relieve the pressure. WARNING: Contents may be under pressure. Rotate the fuel cap 1/4 turn to relieve pressure before opening. 4. Press down on the tab lock again and remove the cap.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 34.4 kPa conditions={"equivalent_imperial":"5.0 psi","action":"Opens to vent to atmosphere when internal pressure exceeds this value"}
Diagnostic · Cause: Leak in the fuel supply line to the outboard, or fuel supply system to the outboard is too restrictive Test: Check for leaks in the fuel supply line to the outboard; if no leak is found, evaluate fuel supply sy...
Spec · 34.4 kPa conditions={"equivalent":"5.0 psi","description":"Vent opens to atmosphere if pressure exceeds this value"}
Procedure · 1. When installing the fuel tank cap, turn the cap to the right until you hear a click. This signals that the fuel cap is fully seated. A built-in device prevents overtightening. 2. Open the manual vent screw on top o...
Diagnostic · Cause: Improper reassembly or damaged fuel system component Test: Visual inspection of all serviced fuel system connections and components before starting the engine