Specification
115 Pro XS: Valve clearance (cold) – Intake valve
0.050–0.102 mm (0.002–0.004 in.) mm conditions={"temperature":"cold"}
Specification
0.050–0.102 mm (0.002–0.004 in.) mm conditions={"temperature":"cold"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Tilt the outboard to a vertical position. 2. Use a 16 mm (5/8 in.) wrench and loosen the oil drain valve so that it can be turned by hand. Be careful not to open the valve too far allowing oil to drain. 3. Attach a...
Diagnostic · Cause: Obstruction in water intake holes in lower unit Test: Stop engine and inspect water intake holes in lower unit for obstruction
Spec · 0.128–0.179 mm (0.005–0.007 in.) mm conditions={"temperature":"cold"}
Procedure · 4. Secure the fuel pressure gauge purge hose into an appropriate fuel container to collect excess fuel. Components involved: (a) Fuel pressure gauge purge valve, (b) Schrader valve, (c) Purge hose to appropriate conta...
Diagnostic · Cause: Fuel flow restriction caused by added components (filters, valves, fittings) in the fuel supply system