Corrosion Guard (Tube Ref No. 120): Corrosion Guard Application

Related KB links

• Operating in Saltwater or Polluted Water

  Procedure · 1. Flush the internal water passages with fresh water after each use in salt or polluted water to prevent deposit buildup in the water passages. Refer to Maintenance – Flushing the Cooling System. 2. If the boat is mo...

• Corrosion of metal parts, deterioration of rubber or plastic parts, or fuel permeation through rubber fuel lines

  Diagnostic · Cause: Alcohol content in gasoline absorbing moisture, causing water and alcohol to separate from gasoline in fuel tank Test: Inspect fuel system components for corrosion or deterioration; verify alcohol content does ...

• Engine Guardian System: Engine Guardian warning horn duration

  Spec · 6 seconds conditions={"trigger":"Critical sensor fault detected"}

• Powerhead Cleaning and Corrosion Protection (Saltwater Use)

  Procedure · 1. Remove the top cowl and flywheel cover. 2. Inspect the powerhead and powerhead components for salt buildup. 3. Wash off any salt buildup from the powerhead and powerhead components with fresh water. WARNING: Keep w...

• Fuel system leakage or component deterioration (softening, hardening, swelling, corrosion)

  Diagnostic · Cause: Age, storage conditions, or use of alcohol-blend fuels washing protective oil films from internal components