Specification
Primary Fuel Hose: Low Permeation Hose Max Permeation Rate
15 g/m²/24 h conditions={"testFuel":"CE 10","temperature":"23 °C","standard":"SAE J1527"}
Specification
15 g/m²/24 h conditions={"testFuel":"CE 10","temperature":"23 °C","standard":"SAE J1527"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Push in on the fuel hose release tabs and disconnect the fuel hoses from the fuel filter.
Diagnostic · Cause: Alcohol content in gasoline absorbing moisture, causing water and alcohol to separate from gasoline in fuel tank Test: Inspect fuel system components for corrosion or deterioration; verify alcohol content does ...
Spec · USCG Type B1-15 or Type A1-15 conditions={"permeationLimit":"not exceeding 15 g/m²/24 h","testFuel":"CE 10","testTemperature":"23 °C","standard":"SAE J1527 - marine fuel hose"}
Procedure · 1. Install the new fuel filter so the arrow points toward the engine. 2. Connect the fuel hoses to the fuel filter securely with the locking hose connections. 3. Visually inspect for fuel leakage from the fuel filter ...
Diagnostic · Cause: Fuel flow restriction caused by added components (filters, valves, fittings) in the fuel supply system