Procedure
1. Pull choke knob completely out. 2. Pull the starter handle slowly until you feel engagement, then pull it quickly. Repeat if necessary until engine starts. 3. Push choke knob halfway in as engine is warming up. 4. Return grip to SLOW position and run engine to warm up for several minutes. 5. Push choke knob in completely after engine is fully warmed up.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 1000 RPM conditions={"state":"After warming up","transmission":"In Neutral"}
Diagnostic · Cause: Fuel flooding Test: Push in choke knob, wait 30 seconds, then continue cranking
Spec · 850 RPM conditions={"state":"After warming up","transmission":"In Gear"}
Procedure · 1. Push in the choke knob. Wait 30 seconds, then continue to crank the engine for starting.
Diagnostic · Cause: Faulty lanyard stop switch Test: Start the engine and stop it by pulling the lanyard cord; if the engine does not stop, the switch requires repair