Procedure
1. Pour the full amount of oil along with approximately one gallon (3.8 L) of gasoline into an approved container. 2. Shake the oil and gasoline together until thoroughly mixed. 3. Add the remainder of the gasoline to the container. 4. Shake the container again to ensure complete mixing.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 1:50 conditions={"period":"After break-in"}
Diagnostic · Cause: Water or dirt in the fuel tank or fuel filter Test: Inspect and drain fuel tank; inspect fuel filter for water or dirt contamination
Spec · 1:50 (Engine oil:fuel)
Procedure · 1. Mix oil and gasoline at a 1:25 ratio thoroughly in an approved container before pouring into the motor fuel tank. Do not pour oil and fuel separately into the fuel tank. 2. Pour the mixed fuel into the tank through...
Diagnostic · Cause: Fuel flooding Test: Push in choke knob, wait 30 seconds, then continue cranking